2016 monolithic inductor specifications, test conditions

2023-05-08 10:53

2016‑specification monolithic micro‑inductor Monolithic Inductor Test Notes Note 1: All test data are referenced to an ambient temperature of 25°C. Note 2: Test conditions: 1 MHz, 1.0 Vrms.

2016‑specification monolithic micro-inductor

Remarks on Integrated Molded Inductor Testing

Note 1: All test data are referenced to an ambient temperature of 25°C.

Note 2: Test conditions: 1 MHz, 1.0 Vrms.

Note 3: Irms: DC current (A), which will result in a temperature rise of approximately ΔT = 40°C.

Note 4: Isat: DC current (A), which will cause L0 to decrease by approximately 30%.

Note 5: Operating temperature range: −55°C to +125°C.

Note 6: Under the worst-case operating conditions at °C, the component temperature (ambient plus temperature rise) must not exceed 125. Circuit design, component placement, PCB trace dimensions and thickness, airflow, and other cooling measures all influence component temperature. Component temperature should be verified in the final application.

Note 7: The rated current listed is either the saturation current or the heating current, whichever is lower.

The 2016‑size monolithic inductor is a common specification.

It can be divided into three types: 201608, 201610, and 201612.

A full range of RDC values and saturation currents is available.

Prev:

Monolithic inductors effectively enhance the performance of electronic products.

Next:

2520 Integrated Molded Inductor Specifications

Return to list

Related News

Huacui Weiguan will exhibit at the “CITE 2026 – The 14th China Electronic Information Expo.”

Backed by Tongyou Group and leveraging its end-to-end synergy across the “materials–equipment–devices” value chain, Huacui Weiguan is set to exhibit at CITE 2026, the 14th China Electronic Information Expo.

Smaller size, stronger performance! Huacui empowers smart wearable devices with extreme lightness and thinness.

In the current trend toward product miniaturization, inductor sizes continue to shrink to meet the demands of consumer electronics, automotive applications, fast‑charging systems, and AI devices for slimmer form factors and higher integration. Meanwhile, advances in high‑permeability, low‑loss magnetic powders and high‑performance coil materials enable small‑size components to satisfy requirements for high current handling and low losses.

Carbon Footprint Verification Report

Life Cycle Assessment (LCA) is a standardized, systematic, and quantitative methodology for evaluating the resource and environmental efficiency of a product throughout its entire life cycle. By tracing the production and consumption stages upstream and downstream, LCA helps manufacturers identify the specific phases where environmental impacts arise and facilitates the mitigation of their transfer across different life-cycle stages and among various types of environmental effects. Many industries, both domestically and internationally, have undertaken product LCA assessments to support benchmarking and continuous improvement within firms, foster external communication, and provide evidence‑based input for policy formulation.